Remsafe Venlock Black Window Restrictor

I/N: 0026010
Price correct as at Mon 20 May 2019 5:52:03pm
Add to Store Order
Products can be picked up or delivered. Your local store will contact you to confirm stock availability, delivery charges and organise payment.
Add to Cart
Confirm whether the customer will pick up their order or have it delivered. Contact the supplier to confirm stock availability. If applicable, please organise payment at this time.
Not all products available in all stores
Contact your nearest store for product information.

Special Order

Contact your nearest store to order

Product Description

The Remsafe Venlock is the original window lock designed specifically for use on sliding aluminium windows.

Designed to increase safety around windows without limiting ventilation, the Venlock is the smallest and most discreet lock of its type. It is easier and quicker to install and operate than any other window restrictor available.

Once installed, the Remsafe Venlock window restrictor gives you the flexibility to lock your window in the restricted position, or open your window to its full extent when safe to do so.

  • Easy 30 second DIY installation
  • Complies with safety requirements under Australian legislation
  • Child resistant release mechanism allows the window to be opened to its full extent if required
  • Australian owned and designed
  • Keyed alike across the Remsafe Window Locks range

Product Details

Model Name
Remsafe Venlock Window Restrictor Black
Model Number
Product Dimensions (mm)
W:20 H:30 L:40
Package Dimensions (mm)
W:22 H:31 L:37
Keys Included
Number of Keys

Product Downloads

Installation Guide
User Guide

Additional Info

Installation Info

1. With the window in the closed position, place the drilling jig over
the window sill at your desired ventilation position.

Maximum opening should not exceed 12.5cm at any point on
the window.

2. Mark drilling jig hole with sharp pencil. Note: Check jig for FRONT

3. Drill hole using a 6.5mm or ¼ inch drill piece.

4. Place Remsafe Venlock over sill and push to lock.

5. For thicker window sills use packing plate provided.

6. For added security the Remsafe Venlock can be installed up
against the window frame in the closed position.


The manufacturer recommends maintenance is carried out on Remsafe products by a licensed tradesman every twelve (12) months. In addition, it is recommended that regular checks (every three to six months) are carried out by the user of each window safety device at the time of operation.

Repeated force on a Remsafe Window Locks safety device may lead to general wear and tear and cause screws to become loose.

Consideration must be given to the local environment and maintenance carried out accordingly.

1. All screws should be checked to ensure they have not loosened. Loose screws must be tightened.

2. All lock components should be checked for any signs of corrosion, cracking, or loss of function. Any locks showing signs of corrosion, cracking, or loss of function should be replaced immediately.

3. All components should be checked to ensure against excessive movement. Any lock showing excessive
movement should be replaced immediately.

4. If a window is able to be opened greater than 125 mm at any point a licensed tradesperson should be consulted for advice on the most appropriate window restrictor device for each window.

Top of the content