Installation of Matrix Garden Edge is simple and fast. Snap off the
attached pins and clips, then place the panels in the ground leaving a 5mm expansion gap between them. Tap in if necessary using a piece of wood or a rubber mallet. Push the clips through the front of adjoining panels, then insert pins through both clips at rear of the panels. This will align the panels and hold them straight. In soft soils, you may need to use timber stakes to provide additional support. Where curves are required, Matrix Garden Edge can flex easily to form gentle arcs. Severe bends will require additional support pegs.
NOTE: All plastic products will expand and contract with changes in temperature. If during installation no allowance is made for this, damage to the product may result, which will void the warranty.