Kreg Pocket-Hole Jig

Build pocket-hole projects anytime, anywhere! The most versatile pocket-hole jig yet from Kreg. Features the VersaGrip 360° rotating handle with built-in clamping. Includes a 520Pro jig, a 51 mm face clamp, 100 Kreg pocket-hole screws, a drill bit and #2 driver bit, and an easy-set stop collar. This jig sets the standard for versatility in pocket-hole joinery. It’s loaded with features, like the VersaGrip 360°- rotating handle that helps the 520PRO adapt easily to nearly any pocket hole project. VersaGrip also includes built-in clamping – just squeeze the handle until your material is clamped securely. With this flexible design, you’ll never have to worry about struggling with large boards or sheets to add pocket holes in the right places. Instead, the 520PRO works in almost any orientation, so you can easily move the jig to any position, clamp it, and drill perfect pocket holes. Preparing to drill pocket holes is easy. Preset material thickness settings on the drill guide block makes setup fast for 1/2" (13mm), 3/4" (19mm), and 1 1/2" (38mm) material. Plus, the adjustable stop offers repeatability when you need to drill multiple pocket holes in pieces of similar thickness. A sturdy steel-reinforced spine and hardened steel drill guides ensure that the 520PRO will deliver years of quality project building performance. With the Pocket-Hole Jig 520PRO, you get a 2" (51mm) face clamp, 100 Kreg pocket-hole screws, and a free project plan so you can start building right away. The Pocket-Hole Jig 520PRO can even be transformed into benchtop jig by adding the Pocket-Hole Jig Clamp or Docking Station, sold separately. Compability: Kreg Pocket-Hole Screws Micro-Pocket Drill Guide Easy-Set Drill Bit Kreg Docking Station Kreg Pocket-Hole Jig Clamp