Skip to content
Locating nearby store...
Please enter at least 3 character
Suggested Suburbs
Suggested Stores
Previous Stores
Change Store

Initializing title...

  • Suits hot and cold water
  • Operating temperature +90℃/0℃
  • 5 Year guarantee
  • Watermark ApprovalMark

Stainless Steel Braided Water connector with EPDM Rubber inner tube for connecting a 15mm male and a 15mm female plumbing fitting. Flexible for working tight spaces. Typically used to connect toilets and tapware.

INSTALLATION
1. turn off water supply and remove old hose
2. clean all connecting threads
3. install connector
4. turn water on and inspect for leaks

FURTHER INFORMATION
- not suitable for use inside walls, ceiling, underground etc.
- do not stretch, twist, kink or expose to naked flames or corrosive agents.
- do not over tighten nuts.
- suits hot and cold water.
- operating temperature +90°C / 0°C.
- water connectors should be replaced every 5 years.

PRODUCT WARRANTY
Any claim under this warranty must be made within 5 years of the date of purchase of the product. To make a claim under the warranty, take the product (with proof of purchase) to any Bunnings store (see www.bunnings.com.au for store locations). Logan Arms Pty Ltd bears reasonable, direct, expenses of claiming under the warranty. You may submit details and proof to a Bunnings store for consideration. The warranty covers manufacturer defects in materials, workmanship and finish under normal use. This warranty is provided in addition to other rights and remedies you may have under law; our goods come with guarantees which cannot be excluded under the Australian Consumer Law. You are entitled to replacement or refund for a major failure and to compensation for other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of an acceptable quality and the failure does not amount to a major failure. The warranty excludes damage resulting from product misuse or product neglect. The warranty covers domestic use only and does not apply to commercial applications.
This warranty is given by Logan Arms Pty Ltd,
ABN: 59 139 416 863,
98-100 Williams Road, Dandenong VIC 3175,
Ph: (03) 9792 3088
Email: sales@hardwaresupply.com.au

We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy

Returns policy