Inflatable Touring Kayak High-Pressure 2 Person - X100+ - Yellow

Our team of enthusiasts has developed this kayak for beginners for solo or tandem touring for 2 to 3 hours in calm waters Technical dimensions and weights. INFLATED SIZELength: 365 cmWidth:103 cmFOLDED & BAGGED SIZEHeight:67 cmWidth:40 cmThickness:30 cmWeight:16 kgMaximum floor pressure:0.34 bar (5 psi)Side tube and seat pressure:0.2 bar (3 psi)Number of seats:1 or 2 seatsContent:kayak, bag, repair kit, 3 fins, user guide, inflation connector, strap.PUMP NOT INCLUDEDFor use with an Itiwit double-action hand pump with adapters Inflation tips and floor positioning Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the floor to 5 psi.Finish by screwing the cap back on.Put the floor inside the kayak and strap it at the ends.The floor valve must be aligned with the side tube valves located at the back of the kayak.The floor's position must allow free access to the drain plugs located in the middle of the kayak. Side tube and seat inflation tips Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the side tubes to 3 psi.Finish by screwing the cap back on.Each side tube has a pressure relief valve.Its purpose is to evacuate excess air resulting from over-inflation.When this happens, you may notice a hissing sound.This hissing sound is normal, it can also occur during prolonged exposure to the sun.It will stop once the kayak reaches the correct internal pressure. Seat comfort and positioning. The seats are high, providing increased comfort for adults in the paddling position.Position the seats on the floor using the velcro areas located under the seat and on the floor.Stow any bags or equipment into the kayak's rear hatch or attach to the rear deck.The boat is ready to be launched. Glide performance Thanks to the stiffness of the Dropstitch floor Maintenance advice Remove the seats and slightly ...