- For 2 to 4 people, up to a maximum of 260 kg (573 lbs).
- Inflates in 10 minutes with a dual action hand pump.
- Side tubes and a wide inflatable floor for good stability.
- Glide performance : the bow shape gives the kayak good glide performance. 3 keels.
- Sitting comfort : raised seat for comfort when at rest and when paddling.
Our team of enthusiasts have developed this kayak for beginners touring with two, three or four people, in calm waters, for two to three hours
Technical data and weight.
INFLATED SIZELength: 460 cmWidth: 103 cmFOLDED & BAGGED SIZEHeight: 75 cmWidth: 43 cmThickness: 32 cmWeight: 20 kgMaximum floor pressure: 0.34 bar (5 psi)Side tube and seat pressure: 0.2 bar (3 psi)Number of seats: 2.3 or 4 seatsContent: kayak, bag, repair kit, 3 fins, user guide, inflation connector, strap.PUMP NOT INCLUDEDFor use with an Itiwit double-action hand pump with adapters
Inflation tips and floor positioning
Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the floor to 5 psi. Finish by screwing the cap back on.Put the floor inside the kayak and strap it at the ends. The floor valve must be aligned with the side tube valves located at the back of the kayak. The floor's position must allow free access to the drain plugs located in the middle of the kayak.
Side tube and seat inflation tips
Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the side tubes to 3 psi. Finish by screwing the cap back on. Each side tube has a pressure relief valve. Its purpose is to evacuate excess air resulting from overinflation. When this happens, you may notice a hissing sound. This hissing is normal, it can happen during inflation or after prolonged exposure to sun. It will stop once the pressure inside the kayak is correct
Seat comfort and positioning.
The seats are high, providing increased comfort for adults in the paddling position.Position the seats on the floor using the velcro areas located under the seat and on the floor.Stow any bags or equipment into the kayak's rear hatch or attach to the rear deck.The boat is ready to be launched.
Glide performance
The deck of the Itiwit 100+ is based on the same dropstitch construction as the ...
