Holman 4m Mist System Expansion Kit

I/N: 3120719
Price correct as at Sun 23 Oct 2016 6:50:15
Add to Store Order
Products can be picked up or delivered. Your local store will contact you to confirm stock availability, delivery charges and organise payment.
Not all products available in all stores
Contact your nearest store for product information.

Special Order

Contact your nearest store to order this product


The Holman Misting System uses the same principle as an evaporative air conditioner but a far lower cost both when setting up and running. A super fine mist is emitted under pressure from nozzles and as this evaporates it cools the air, it's as simple as that. By setting the supply lines so that the mist creates a curtain of cool,air around the edge of your entertaining area you can achieve effective outdoor air conditioning. This works just as we'll in Perth during a dry hot summers day as in Darwin where humidity is a real killer in the wet season.

The amount of water used is minuscule but the effect is amazing. You can further reduce the water use age by connecting in an Holman automatic mist controller which allow the system to come on for just seconds and you can also set the interval. In other words create an intermittent but controlled bursts of mist.

The kit is simple to set up and it can be easily added to as required with an extension kit. Each kit comes with nail clamps to attach the fine supply pipe to wood plaster or brick.

The system attaches to a tap using the standard click on fitting. Work out the lengths of supply pipe needed and make clean "square" cuts which are clean of burrs. You can get a special HOLMAN Misting tube cutter and this is a good investment. The fittings are pressure constrictors which sounds complicated but so easy all you have to do is push the pipe in as far as it will go. When the water pressure is applied by turning on the tap the seal becomes almost unbreakable. It's brilliant. Set up so that nozzles are positioned 60 cm to a metre apart.

Use tees to split the line and an elbow to end the run. Place the supporting clips either side of the nozzles for proper support and flush the line for 4 to 5 minutes before screwing in the brass spray nozzles. As a basic principle avoid placing nozzles directly over tables and seats as you can get occasional drips which can be annoying. Instead create that curtain of cool air just around the outside of the entertaining area.

Two critical components are the Auto draining valve which takes pressure out of the system between operations and as such extends the life of the unit - big time. Then there is misting filter which takes out fine particle which would otherwise lead to nozzle blocking. Both of these need to be down near the tap

  • Quick and easy installation
  • Fully expandable system
  • 2 x kits available to start your system or expand it
  • 1 year guarantee
  • Prefect for cooling down patios, recreation or pet ares
Model Name
Misting Expansion Kit
Model Number
High Pressure Tubing / Brass Nozzles / Plastic Hose Clamps
Beige / Brass / White
Product Dimensions (mm)
W:260 H:240 L:65
Package Dimensions (mm)
W:261 H:240 L:66
Above Ground
Below Ground
Coverage Area (mtr)

D.I.Y. Advice

Wire up the irrigation system 03:35

Watering & Irrigation How to automate a garden irrigation system Automating your garden irrigation system saves you heaps of time. We’ll show you how to connect the control panel to the solenoids in your garden’s irrigation box.

Woman measuring up the garden 01:45

Watering & Irrigation How to plan a garden irrigation system Before you irrigate your garden it’s best to be prepared. We’ll take you through the steps to plan out a garden irrigation system.

Person gluing the joins 04:29

Watering & Irrigation How to install fixed pipe irrigation Find out how to install a fixed pipe irrigation system to water your lawn.

Person installing a drip line 05:56

Watering & Irrigation How to install irrigation sprayers and drippers Sprayers and drippers are a good option for watering your garden. Find out how to install sprinklers, flexi tube drippers and drip lines in your garden.

Person attaching the pop-up sprinklers 03:24

Watering & Irrigation How to install pop-up sprinklers You can give your garden a real boost by installing pop-up sprinklers. We’ll take you through the steps involved in installing sprinklers to keep any size garden healthy.

Person checking the taps water flow 05:00

How To Save Water How to save water at home Find out how easy it is to save water around your home. We’ll show you some handy tips to help conserve water and save money.

Bushfire sprinkler system setup

Watering & Irrigation How to choose a bushfire sprinkler system A sprinkler system can be an invaluable way to help protect your home from bushfire. We’ll show you some simple tips on how to use sprinklers to help keep your home safe.

Water tank on top of the base 04:36

Watering & Irrigation How to prepare a base for a water tank Water tanks are a great way to save water and help drought proof your home. We’ll show you how to build a base strong enough to support a big one.

Top of the content