Everhard EasyDRAIN Sandstone Polymer Corner and Polymer Grate

I/N: 4770422
$34.90
Price correct as at Tue 06 Dec 2016 5:46:58
Add to Store Order
Products can be picked up or delivered. Your local store will contact you to confirm stock availability, delivery charges and organise payment.
Not all products available in all stores
Contact your nearest store for product information.

Special Order

Contact your nearest store to order this product

Product Description

The EasyDRAIN™ Sandstone Polymer Channel with Polymer Grate is an easy DIY surface water drainage system suitable for around the home and light commercial areas including exterior patios, swimming pool areas, driveways, playgrounds, paved terraces, car parks and walkways.

  • The sandstone colour matches with similarly coloured pavers and stamped concrete
  • Allows for a 90 degree change of direction
  • Made from tough, UV stabilised polymer that is super-light and easy to handle
  • The channel with polymer grates, once correctly installed in concrete, is rated to 1.5 tonne wheel loads
  • Australian made

Product Details

Model Name
EasyDRAIN Sandstone Polymer Corner with Sandstone Polymer Grate
Model Number
83332
Material
Polymer
Colour
Sandstone
Product Dimensions (mm)
W:170 H:137 L:170
Package Dimensions (mm)
W:170 H:137 L:170
Weight
0.54

Product Downloads

Brochure
Download
Installation Guide
Download
User Guide
Download
Warranty
Download

Additional Info

Warranty Info

EasyDRAIN Polymer Channel and Polymer Grate = 5 years
Please visit www.everhard.com.au for full details

Installation Info

1. Prepare Trench
Dig a trench that is 50mm deeper and wider than the channel being installed.
Place compacted bedding sand or concrete slurry in the base of the trench.
Use a string line to ensure straightness and the correct finish height.
Attach the grates to the channel prior to installation

2. Install Channel
Connect the end cap to ends of the channel and seal with silicone.
If required, cut the channel to the desired length
To connect to pvc pipe, cut and outlet in the base of the channel (or End Cap for standard Easydrain) as required.
Connect lengths of channel as necessary ensuring that the joints click together.

3. Finish Installation
Place a suitable expansion material along the top edge of the channel.
Pour concrete around each side of the channel ensuring that the base is completely immersed.
Lightly compact and finish the concrete slightly above the surface level of the grate(approximately 2-3mm to promote run off from the surrounding area into the drain.

Top of the content