- Available untreated, H2 glueline treated or H3 LOSP treated for external or wet area uses
- Superior span, strength and durability compared to most other flooring substrate systems
- Suitable as a substrate for overlays such as carpet, tiles, resilient sheet, vinyl tiles and some membrane products (refer to flooring manufacturer).
- Blocking within the body of the floor is not required under tongue and groove edges unless otherwise specified (such as in domestic garage floors)
- Plastic tongue along long edges to form a tongue and groove joint between sheets
Ecoply® Plyfloor structural plywood panels are manufactured in Australia and New Zealand from locally sourced radiata pine wood veneers. The veneers are placed at right angles to each other for maximum strength and stability then bonded together with synthetic phenolic (PF) resin to form a strong and permanent Type A bond. Ecoply® is made from relatively soft radiata pine and as such will dent or mark more easily than hardwood flooring systems and the long term appearance requirements of the project must be considered. Ecoply® Flooring is a good substrate for harder wearing flooring overlays and is not primarily intended for clear finishing, especially if it is exposed to moisture during construction.
