Bunnings
Icon - Website - Mobile - Add to project list.svgIcon - Website - Mobile - Cart.svg

Sign in to your account

Project list

Sign in to your account

Dy-Mark

Dy-Mark TreadRite - 1L

No reviews yet

I/N: 1560347

No reviews yet

I/N: 1560347

Features

  • Creates durable slip resistant surfaces - suitable for use on ramps
  • Easy to apply with uniform coverage
  • Resists cracking, peeling and exposure to petrol, oil and mild chemicals
  • Tested for compliance with AS/NZS 4586:2004 (Classification V)
  • Ideal for interior and exterior untreated timber, concrete, primed metal, brick clay pavers and pebble finish surfaces
Dy-Mark TreadRite is a textured, acrylic based, UV stable coating ideal for creating durable, slip resistant surfaces
around the home or workplace.

Details

Dimensions

 

Width

Height

Length

Product

110mm130mm110mm

Package

110mm135mm110mm

Specifications

Colour
Clear
Model Name
TreadRite 1L - Clear
Model Number
23060100
Material
Paving Paint
Size
1L
Volume
1L
Container Size (L)
1

Returns

We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy.

Installation

Preparation:
Refer to Disclaimer before use. A test patch should always be carried out. Clean surface of all dirt, grease, oil, salt and chemical contaminants.
Remove any loose rust and flaking paint. Smooth, hard or glossy surfaces should be sanded to create a surface profile. When removing mould
and mildew you must use a domestic bleach cleaner, soak clean and scrub and allow surface to dry.
Concrete: For best results all concrete surfaces should be etched. New concrete surfaces should be cured for 4-6 weeks. For highly porous
surfaces apply one coat of an appropriate sealer.
Metal: For best results all bare metal surfaces must be primed with a suitable primer.
Application:
Stir thoroughly with a flat stirrer before and frequently during use. (Do not use mechanical stirrers). Use of a good quality brush or roller is
recommended to achieve the best finish. Roller should have a nap length of 5mm to 13mm. Adequate ventilation must be maintained during
application and drying.

Ratings & Reviews