Project Overview

Sliding doors are a stylish way to improve the function of your wardrobe. They make accessing your clothes quicker and also save space where there isn’t enough room to swing a hinged door. Installing them is easy - just follow our step-by-step guide.

Continue to Step-by-step instructions.

Step by Step Instructions

1 Measure the length of your wardrobe
2 Cut your tracks to size
3 Install tracks for the doors
4 Put the doors in place
  • Step 1. Measure the length of your wardrobe

    Firstly, measure the lengths of the tracks you’ll need for the top and bottom of the door and transfer these measurements to your tracks with the pencil. 

  • Step 2. Cut your tracks to size

    Now that you have marked up the tracks with your measurements, put on your safety gear and cut the tracks to size using your angle grinder. 

  • Step 3. Install tracks for the doors

    Use your spirit level to make sure the floor is level before laying the tracks on the floor. Pack up one end if it isn’t. Make a pilot hole in your floor through the track’s pre-drilled hole. Then screw the tracks down in place with your drill. You’ll need someone else to help you hold the track when screwing in the top one.

  • Step 4. Put the doors in place

    Place the rear door into the opening by putting it into the top track first. Then carefully lower the door into the bottom track. Next put the second door into place, starting from the top. Finally, test the doors to see if they close securely.

Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions which came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings team member.

Top of the content