Project Overview

There’s no better place to get away from it all than your backyard. This outdoor daybed will help you to relax and unwind and also makes a great design feature. With just a few tool and materials, you can build one yourself and then use it to put your feet up when you’re done.

Continue to Step-by-step instructions.
Man measuring tile on work bench before cutting
View the video
00:10
×

Quick Tip: Measure twice, cut once

You can rub out a pencil mark but you can’t undo a cut from your saw. Whether you are working with timber, tiles, glass or any other building material, you should always double check your measurements before you cut.

Step by Step Instructions

1 Have your timber pre-cut
2 Build one end of your daybed
3 Measure, mark and drill the first horizontal piece
4 Drill the first horizontal piece
5 Insert the other vertical timber pieces
6 Secure the horizontal timber
7 Secure the second horizontal timber
8 Secure the centre horizontal timber
9 Make the end square
10 Build the second end
11 Put the daybed together
12 Finish the daybed
  • Step 1. Have your timber pre-cut

    To make building your outdoor daybed even easier, work out the length and width you want it to be and have the timber pre-cut at your local Bunnings. In this instance, we’ve used 10 x 125mm x 75mm x 625mm cypress post for the vertical timber, 6 x 125mm x 75mm x 750mm cypress posts for the horizontal timber, and 4 x 90mm x 90mm x 2.4m Merbau posts.

  • Step 2. Build one end of your daybed

    Lay out the timber first to make it easier to understand how the end of your daybed will fit together. Also, work on the ground to make the assembly process easier. Start with two vertical cypress posts (125mm x 75mm x 625mm) and lay two horizontal cypress posts (125mm x 75mm x 750mm) onto them in a square shape, making sure they line up evenly.

  • Step 3. Measure, mark and drill the first horizontal piece

    Measure and mark the ends of the first piece of horizontal timber so that you can secure it to the vertical pieces. Use a cordless drill to make the holes and countersink these so that the screws are hidden. 

  • Step 4. Drill the first horizontal piece

    Drill one end of the first horizontal piece into place over the two vertical pieces. Then repeat this process for the other end until it’s firmly in place.

  • Step 5. Insert the other vertical timber pieces

    Lay the other three lengths of 625mm vertical timber beneath the fixed horizontal piece, between the other two. These will be the vertical posts at the end of your daybed. Use the 90mm spacers to ensure these verticals are evenly spaced apart. 

  • Step 6. Secure the horizontal timber

    With the spacers in place, make sure the first piece of horizontal timber is flush with the end of the vertical timber. Pre-drill holes into the 750mm horizontal piece over the ends of the 625mm verticals and then screw together to secure.

  • Step 7. Secure the second horizontal timber

    Using the 90mm spacers, position the second 750mm horizontal at the other end of the verticals, making sure its flush with each end. Mark and drill pilot holes into the horizontal piece over each vertical and counter sink them. Then use your drill to screw that horizontal securely in place.

  • Step 8. Secure the centre horizontal timber

    The central horizontal timber is the load bearer for the daybed. Use the spacer to make sure it’s the same height (90mm) as the slats of wood you will use to sit on. Pre-drill the holes and countersink them. Then use the drill and screws to attach your timber securely to each piece of vertical timber.

  • Step 9. Make the end square

    Use a square to make sure that the end is square. If it’s not, use a hammer to tap it into place. Pre-drill a hole. Countersink it and then use the drill to secure a second screw into each of the three pieces of horizontal timber.  

  • Step 10. Build the second end

    To build the second end, just follow steps 2–9. Make sure you use the spacers so that it’s identical to the first end that you have built. Use sandpaper to smooth both ends of the daybed.

  • Step 11. Put the daybed together

    You’ll need someone to help you with this step. Stand one of the ends up and slide the Merbau posts into the 90mm gap (between the top and second horizontal). Have someone stand the other end up and insert the opposite ends of the posts into that as well, until the daybed is complete. Make sure all the Merbau ends are flush with the stand ends.

  • Step 12. Finish the daybed

    You can paint or stain your daybed depending on the look you want. Add some cushions, find a good book or magazine and your daybed is ready to go.
Get council approval forms 01:00

Decking Planning to build a deck Good preparation is the secret to any successful D.I.Y. project. We’ll take you through all the stages involved in getting ready to build a deck.

Man bolting temporary timber guides in place 04:24

Decking How to set out a deck Before you can build a deck, it’s important to do the groundwork. We’ll show you how to measure and run string lines to mark the height of your deck and position of your stumps.

Install other bearers 03:47

Decking How to install bearers and stumps for a deck To install an outdoor deck, you’ll need a solid foundation. We’ll show you how to sink the stumps and attach the bearers for your foundation.

Person cutting a check-out in the wall plate 02:57

Decking How to install joists for a deck Installing the joists for your decking is an important step in the project. We’ll show you how to install the joists that will form a strong foundation for your deck.

lay decking 02:46

Decking How to lay decking You can make the most of your outdoors and add real value to your home with a deck. We’ll take you through the steps involved in laying merbau decking.

Pre-drill holes to attach decking 05:17

Decking How to build modular decking Find out how to build your own outdoor living area with modular decking

Deck lights connected to power 02:07

Lighting How to install deck lights Turn your deck into a space you can use night and day. This video will show you how to install lights into your decking.

Person cleaning the deck with high pressure water cleaner 02:46

Decking How to choose and maintain decking for a beach house An outdoor deck is a great spot for entertaining. We’ll show you how to choose the right materials and finishing, and give you some maintenance tips.

Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions which came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings team member.

Top of the content