Project Overview

We’ll show you how to install a bamboo blind on an outdoor window. You’ll see how to measure and position the fixings and attach the blind to the window frame.
Continue to Step-by-step instructions.

Step by Step Instructions

1 Measure the blinds fixing points
2 Mark out your fixing points on the wall
3 Screw the blind to the wall
4 Make sure the blind is level
  • Step 1. Measure the blinds fixing points

    Choose a blind to fit the width of your window frame. Measure from each end to the blinds fixing points, so you can transfer those measurements onto the wall above your window. 

  • Step 2. Mark out your fixing points on the wall

    Next measure up from the window and mark out the position you need to screw the fixings evenly on each end and the middle.

  • Step 3. Screw the blind to the wall

    Starting with an end fixing, take your drill and screw through the eyelet on the blind, straight into the wall. Attach it loosely so you can swing the blind up and screw in the other end. Leave attaching the middle fixing to last. 

  • Step 4. Make sure the blind is level

    Before you tighten all the screws, check your blind is level with the spirit level. Then secure the blind in place. Make sure that the chords are out of reach of children. 

Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions which came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings team member.

Top of the content