How to install a video door phone

Nadine
View the video

How to install a video door phone

View the video
×

Project Overview

A video door phone is a great security feature in your home. It enables you to see who is at the door without having to answer it. We’ll show you how to install one, including the camera at your front door and the monitor inside your house.

Continue to step-by-step instructions

Step by Step Instructions

1 Run the cable through your roof
2 Mark the holes for the bracket
3 Pre-drill the holes
4 Insert the wall plugs
5 Screw the bracket to the wall
6 Connect wires to the camera
7 Connect camera to wall mount
8 Mount monitor bracket in house
9 Hook up the wires and power for the monitor
10 Attach the monitor to the bracket
  • Step 1. Run the cable through your roof

    Before you start, you’ll need to run the cable through the roof between the position of the camera and the video screen. Drill holes in the wall and using a draw cable, pull the wire through the wall at the front door where the camera will go and in the kitchen where the screen will be.

  • Step 2. Mark the holes for the bracket

    Position the bracket over the wire and mark your holes on the wall with your pencil.

  • Step 3. Pre-drill the holes

    Use your drill to pre-drill the holes. You will need to use a masonry drill bit if you are drilling into a brick wall.

  • Step 4. Insert the wall plugs

    Now put the wall plugs in the holes and tap them in with a hammer.

  • Step 5. Screw the bracket to the wall

    Now take your screws and fix the bracket to the wall using your screwdriver. 
  • Step 6. Connect wires to the camera

    On the back of most cameras you’ll find instructions showing you where to attach each wire. Following these instructions carefully, use a screwdriver and attach the wires to the back of the camera.

  • Step 7. Connect camera to wall mount

    On the backing plate of the camera is double-sided tape. Attach the tape to the camera backing and then stick the camera onto the wall mount firmly into position. Tighten up the grub screw at the bottom of the mount for a more secure fixing. 

  • Step 8. Mount monitor bracket in house

    At the indoor location where your monitor will go, you will already have your feeder wire poking through your pre-drilled hole (refer to step 1). Pull the wire out and mount the monitor bracket by marking your holes and using a spirit level to make sure the bracket will be level.  Pre-drill your holes and use plasterboard fixings to fix the bracket to the wall.  

  • Step 9. Hook up the wires and power for the monitor

    Just like attaching the wires to the camera, you will have instructions showing you how to attach your wires to the monitor. Attach the wires and then plug in the power source before you hang the monitor on the wall. 
  • Step 10. Attach the monitor to the bracket

    Now you’re ready to clip the monitor onto the wall bracket. Turn on the power and you’re ready to go. You could also get an electrician to hard wire the unit for you if you prefer.

install hinges and gass struts

Tools & D.I.Y. Skills Five cordless power tools that will make your D.I.Y. projects easier Cordless power tools offer you the flexibility and freedom to work just about anywhere. They’re portable, light weight and easy to handle. Here are our top five cordless tools that will help make your D.I.Y. dreams a reality.

garage

Tools & D.I.Y. Skills Seven handy tool storage ideas Keeping your tools safe, secure and in easy reach makes it so much easier to get your projects done. Whether you need tool storage for work or around the home, there’s a huge range of handy options in all shapes and sizes.

How to restore wooden furniture 03:36

Tools & D.I.Y. Skills How to restore wooden furniture If you’ve got old wooden furniture that’s seen better days, you’d be surprised how easy it is to restore it and give it a new lease of life

Person rubbing steel wool over hammer 02:42

Tools & D.I.Y. Skills How to clean rusty tools We’ll show you how to restore your rusty tools.

Cordless Drill

Tools & D.I.Y. Skills Cordless drill buying guide The cordless drill will be the most used power tool you’ll own, so deciding which one to buy is an important decision. This guide will help you choose the cordless drill that’s right for you.

Man measuring project 01:57

Tools & D.I.Y. Skills How to calculate square metres Learn how to calculate in square metres to make sure you order enough materials for your renovations and D.I.Y. projects.

Hire Shop at Bunnings 01:35

Tools & D.I.Y. Skills Tips for using a Britex carpet cleaner The Britex carpet cleaner removes deep down stains in carpet and upholstery.

Man using small step ladder 03:10

Tools & D.I.Y. Skills How to use a ladder correctly Ladders are very useful, but it’s important to keep safe and use them correctly. We show you how to use three different ladders properly.

Health & Safety

Please make sure you use all equipment appropriately and safely when following the advice in these D.I.Y. videos. You need to be familiar with how to use equipment safely and follow the instructions that came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert Bunnings Team Member.

Grave health hazards are linked to asbestos, which may be in homes built up to 1990. Health hazards may result from exposure to lead-based paints in older materials and copper chromium arsenic (CCA) treated timber. For information on the dangers of asbestos, lead-based paint and CCA treated timber and tips for dealing with these materials contact your local council's Environmental Health Officer or visit our Health & Safety page. You can also use a simple test kit from Bunnings to indicate the presence of lead-based paint Test.
Top of the content