Crescent 3 / 8" Drive Roto Ratchet

I/N: 6120207
$30.98
Price correct as at Tue 06 Dec 2016 1:50:44
Add to Store Order
Products can be picked up or delivered. Your local store will contact you to confirm stock availability, delivery charges and organise payment.
Not all products available in all stores
Contact your nearest store for product information.

Special Order

Contact your nearest store to order this product

Product Description

The Crescent flex-head swivel ratchet with a pivot through drive head, enables a roto ratchet to be positioned perpendicular to fastener. It has head bolts with variable obstructions and spark plug service. In a vertical position it can speed down like a screwdriver. In a horizontal position, it provides increased torque.

  • Fine tooth 72 teeth, less than five degree swing arc for greater access
  • Head rotates 180 degrees, dual material cushion grip
  • Delivers maximum torque, axially aligned for rapid speed
  • Flex-head swivel ratchet with a pivot through drive head, enables roto ratchet to be
  • Heads can be loosened with hex 2.5mm for ¼” or torx (for 3/8”) drivers

Product Details

Model Name
Crescent 3/8" Drive Roto Ratchet
Model Number
CROTO2
Material
Dual Material Cushion Grip
Colour
Red and Black
Product Dimensions (mm)
W:44 H:238 L:33
Package Dimensions (mm)
W:44 H:238 L:33
Weight
384g
Drive size (mm)
10
Number of Pieces
1
Ratcheting
Yes

Additional Info

Warranty Info

Limited Lifetime Guarantee
Apex Tool Group quality products are Guaranteed against any defect in material or workmanship. Damage caused by abuse, improper use or excessive wear is not covered by this warranty.

This warranty is provided in addition to other rights and remedies you have under law: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Claims should be returned, with proof of purchase, to the place of purchase or returned prepaid to the address below. Repaired or replacement goods will be returned at our cost.

Apex Tool Group Pty Limited
519 Nurigong Street, Albury
NSW 2640, AUSTRALIA
Ph: (02) 60580300
apextoolaus@apextoolgroup.com
www.apextoolgroup.com.au

Top of the content