The Danby Bunker Light combines LED technology with the convenience of an inbuilt motion sensor. The Danby Bunker provides the perfect solution for your outdoor areas. When motion is detected the light automatically turns on. The material is weather resistant and the ABS lens ensures long lasting reliability.
Dansby LED Bunker with Security Sensor
Adjustable Lamp Head (Yes/No)
Warranty & Returns
We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy.
1. Ensure power to the circuit being connected to is isolated. 2. Remove fixture from all packing materials. 3. Remove outer cover rim by rotating clockwise. 4. Remove diffuser by unscrewing from the mounting base. 5. Select a suitable mounting position to mark the screw holes. 6. Drill suitable holes, then feed the supply cable through the rubber seal on the rear of mounting base. 7. Before fixing the product in place, seal any holes in the wall through which the supply cable passes so as to weatherproof it. Ensure cable entry hole is properly sealed off. 8. Secure mounting base with supplied screws. 9. Connect the supply wiring to the terminal block of the fixture, observe the correct polarities as marked. - Connect supply active to terminal marked “L” (or “A”). - Connect supply neutral to terminal marked “N”. 10. Wires must not be trapped or crushed when other parts are refitted. Double check all connections. 11. Re-fit diffuser and insert cover rim by rotating anti-clockwise. 12. Clean off any dust and finger marks from fixture. 13. Energise the circuit and check that the light operates. 14. Dispose of packaging materials thoughtfully.
Ratings & Reviews
PurchaseArlec Danby LED Bunker With Security Sensor