Skip to content
Locating nearby store...
Please enter at least 3 character
Suggested Suburbs
Suggested Stores
Previous Stores
Change Store
  • Toughest breather wall wrap on the Australian market
  • Micro-perforated: Class 3 Vapour Permeable Wall Wrap
  • Effective barrier against wind, rain and dust
  • Pre-shrunk woven polymer minimises shrinkage after installation
  • Suitable for use in bushfire-prone areas

Ametalin SilverSark® Breather Wall Wrap is a 97 per cent reflective, breathable, pliable building membrane. It is an excellent barrier to radiant heat, enhancing the energy performance and thermal comfort of a building, while providing a physical layer to protect against water and air infiltration.

Ametalin SilverSark® Breather Wall Wrap is designed for use as a premium breather wall wrap in all regions of Australia in residential, commercial and office buildings.

Custom printing available. Advertise your business & promote your brand on Ametalin SilverSark® Breather. Contact us for more information.

Ametalin SilverSark® Breather Wall Wrap is not designed to withstand prolonged direct exposure to the elements. Accordingly, upon application of this product the outer roof should be installed without delay. Aluminium foils should not come into contact with wet concrete or mortar, as the aluminium is susceptible to alkali corrosion.

Ametalin SilverSark® Breather Wall Wrap is not to be used as a roof sarking. Ametalin SilverSark® Breather Wall Wrap should be installed in accordance with AS/NZS 4200.2:1994 Pliable Building Membranes and Underlay’s, Part 2: Installation Requirements. Ametalin SilverSark® Breather Wall Wrap is installed with the blue side facing out.

We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy

Returns policy