Ametalin Brane® VHP 1370mm x 30m Wall Wrap Insulation

I/N: 0811065
$77.50
Price correct as at Thu 13 Dec 2018 2:45:08am
Add to Store Order
Products can be picked up or delivered. Your local store will contact you to confirm stock availability, delivery charges and organise payment.
Add to Cart
Confirm whether the customer will pick up their order or have it delivered. Contact the supplier to confirm stock availability. If applicable, please organise payment at this time.
Not all products available in all stores
Contact your nearest store for product information.

Special Order

Contact your nearest store to order

Product Description

Ametalin Brane® VHP Very High Permeance membrane is designed to work as both a High Water Barrier and Low Vapour Barrier. Ametalin Brane® VHP resists liquid water penetration and allows vapour pressure to transmit through the membrane.
The popular specification choice behind Timber and Fibre Cement cladding.

Custom printing available. Advertise your business & promote your brand on Ametalin Brane® VHP. Contact us for more information.

  • Minimises the risk of condensation-related issues like mould, structural problems and ‘sick building syndrome’
  • Guaranteed Water Barrier tested in accordance to AS/NZS 4200.1:1994
  • Suitable for use in bushfire prone areas
  • Also available in 2.7m width for quicker installation. The convenient 2470mm roll halves installation time and reduces the amount of air gaps and joins in the wall system.

Product Details

Model Name
Ametalin Brane® VHP Wall Insulation
Model Number
BRANE-VHP-41
Material
Non-Woven Polymer Fabric
Colour
Blue
Product Dimensions (mm)
W:1370 H:1 L:30000
Package Dimensions (mm)
W:1370 H:1 L:30000
Coverage Area (sp. Mtr.)
41
Sheet or Roll
Roll

Product Downloads

Brochure
Download

Additional Info

Sustainability Info

Any damage made to BRANE® VHP during installation, including holes and tears, must be repaired. BRANE® VHP Wall Wrap is not designed to withstand prolonged direct exposure to UV light and the elements. Outer cladding should be installed without delay.

Installation Info

BRANE® VHP should be installed in accordance with AS/NZS 4200.2:1994 Pliable Building Membranes and Underlays, Part 2: Installation Requirements. BRANE® VHP should be installed horizontally as a continuous membrane by fixing to all framing members with the printed side facing out. Trade SelectTM BRANE® VHP should extend from the top plate to the bottom plate on concrete slabs or bearers in timber construction. Fixings should be galvanised clouts or staples for timber construction and tech screws for fastening to steel constructions. In high wind areas, it is recommended to install using non-rip caps on clouts, staples or tech screws. Horizontal, vertical and end overlaps must be 150 mm, with all top layers overlapping the outside of lower layers to prevent water ingress. Stagger any vertical overlaps.

Top of the content