Ametalin 6.5 x 1350mm x 22.25m ThermalBrane 6.5™ Insulation

I/N: 0811012
Price correct as at Thu 23 Nov 2017 4:41:41pm
Add to Store Order
Products can be picked up or delivered. Your local store will contact you to confirm stock availability, delivery charges and organise payment.
Add to Cart
Confirm whether the customer will pick up their order or have it delivered. Contact the supplier to confirm stock availability. If applicable, please organise payment at this time.
Not all products available in all stores
Contact your nearest store for product information.

Product Description

Ametalin ThermalBrane 6.5™ is an extra heavy duty three-in-one reflective insulation, thermal break and medium vapour barrier, made with high-density XPE 6.5 mm foam between two reflective foil layers.

A thermal break of R0.16 makes it suitable for use in all roof and wall types, except steel frame constructions where a thermal break of R0.2 is required by the NCC/BCA (for steel frames, use Ametalin ThermalBreak 8™).

Ametalin ThermalBrane 6.5™ is ideal for use in residential homes and commercial sheds, and is the preferred choice for double brick constructions. With a 6.5 mm foam layer at its core, it provides a higher thermal protection level for little extra cost, while the reflective foil surfaces keep buildings cool in summer and warm in winter.

  • Three-in-one product enhances thermal insulation when installed with a cavity space
  • Suitable for use in bushfire-prone areas
  • Fibre-free, non-allergenic, noise dampening
  • 150mm flap means no overlaps, ensures a smooth surface
  • Ideal for use in residential homes and commercial sheds

Product Details

Model Name
Ametalin ThermalBrane 6.5™
Model Number
6.5 mm cross-linked, high-density XPE foam
Product Dimensions (mm)
W:1350 H:6.5 L:22250
Package Dimensions (mm)
W:1350 H:6.5 L:22250
18 kgkg
Coverage Area (sp. Mtr.)
Energy Star Compliant
Sheet or Roll

Product Downloads


Additional Info

Sustainability Info

Ametalin ThermalBrane 6.5™ is not designed to withstand prolonged direct exposure to the elements. Accordingly, upon application of this product the outer roof should be installed without delay. Aluminium foils should not come into contact with wet concrete or mortar, as the aluminium is susceptible to alkali corrosion.

Installation Info

Ametalin ThermalBrane 6.5™ should be installed in accordance to AS/NZS 4200.2:1994 Pliable Building Membranes and Underlay’s, Part 2: Installation Requirements. Flexible insulation/sarking type materials should be draped over 450 centre-to-centre rafters with a sag of 40 mm. For larger rafter spacings sag should be increased proportionally. Install with 150 mm overlap untaped or tape with Ametalin Insulation/Ducting Tape.

Ametalin ThermalBrane 6.5™ is installed with the blue anti-glare side facing out.

Top of the content