Icon - Website - Mobile - Add to project list.svgIcon - Website - Mobile - Cart.svg

Sign in to your account

Project list

Sign in to your account


Ametalin 48mm x 50m Insulation / Ducting Tape

4.8 (8)

I/N: 0810227

4.8 (8)

I/N: 0810227

Select your preferred purchase method


  • For installing reflective foil insulation and ductwork closure
  • UV resistant
  • High performance over a wide temperature range: -30°C to +100°C
  • Vapour sealing, ideal for joining insulation products
  • Ultra-tough with superior adhesion
Ametalin Insulation/Ducting Tape is a premium grade high performance 0.08mm UV-resistant metallised polyester
tape coated with a cold weather acrylic adhesive. Designed with vapour-sealing properties to complement our full range of reflective membranes, it can be used with all roof sarking, wall wraps and floor insulation. It is also ideal for use in HVAC, ducting, and as an all-purpose tape for boating and camping.
Ametalin Insulation/Ducting Tape is easy to apply and provides superior performance and durability over a wide range of temperatures and environmental conditions.












Model Name
Ametalin 48mm x 50m Insulation / Ducting Tape
Model Number
0.08mm UV-resistant metallised polyester tape

Guides & Documents


We will gladly assist with returns and exchanges of this product in accordance with our returns and exchanges policy.


Tape Application
1. Ensure that the surfaces to be adhered to are clean, dry and free from oil and other contaminants.
2. Ensure tape is centred on the join.
3. Apply tape, ensuring that the maximum surface contact is achieved by allowing the tape to conform to contours in the product. Apply firm pressure with squeegee as you apply the tape.
4. For thicker foam core products such as Ametalin ThermalBreak 7™, Ametalin Reinforced Insulation/Ducting Tape is recommended and should be applied as deeply as possible into the perpendicular angle.
5. Whenever possible, apply tape to joins that have a firm backing (e.g. studs or rafters) to achieve maximum application pressure. If this is not possible, then provide support from behind with short pieces of steel studs or timber.
6. Taping of joins is a method of sealing joins only, and is not a suitable substitute for mechanical fixing in situations where there may be stress or pressure on the join (e.g. wind loading, etc.). In such cases, a more secure method of securing the join must be considered.

Ratings & Reviews