Ametalin 1370mm x 30m Brane® VHP Wall Wrap Insulation

I/N: 0811065
$76
Price correct as at Wed 22 Nov 2017 4:24:53am
Add to Store Order
Products can be picked up or delivered. Your local store will contact you to confirm stock availability, delivery charges and organise payment.
Add to Cart
Confirm whether the customer will pick up their order or have it delivered. Contact the supplier to confirm stock availability. If applicable, please organise payment at this time.
Not all products available in all stores
Contact your nearest store for product information.

Product Description

Ametalin Brane® VHP is a Very High Vapour Permeance, High Water Barrier building membrane. Ametalin Brane® VHP is designed to overcome the shortcomings of typical single-layer products, which have much lower vapour permeance or are not reliably waterproof.

  • Available in 1.37m wide rolls for easy installation
  • Very high vapour permeance, high water barrier
  • Guaranteed water barrier tested in accordance to AS/NZS 4200.1:1994
  • Ametalin Brane® VHP is an important element in the design of buildings to avoid condensation risks, “sick building syndrome” caused by mould
  • Suitable for use in bushfire-prone areas

Product Details

Model Name
Ametalin Brane® VHP Wall Insulation
Model Number
BRANE-VHP-41
Material
Non-Woven Polymer Fabric
Product Dimensions (mm)
W:1370 H:1 L:30000
Package Dimensions (mm)
W:1370 H:1 L:30000
Coverage Area (sp. Mtr.)
41
Energy Star Compliant
Yes
Sheet or Roll
Roll
Vapor Retardent
Yes

Product Downloads

Brochure
Download

Additional Info

Sustainability Info

Any damage made to BRANE® VHP during installation, including holes and tears, must be repaired. BRANE® VHP Wall Wrap is not designed to withstand prolonged direct exposure to UV light and the elements. Outer cladding should be installed without delay.

Installation Info

BRANE® VHP should be installed in accordance with AS/NZS 4200.2:1994 Pliable Building Membranes and Underlays, Part 2: Installation Requirements. BRANE® VHP should be installed horizontally as a continuous membrane by fixing to all framing members with the printed side facing out. Trade SelectTM BRANE® VHP should extend from the top plate to the bottom plate on concrete slabs or bearers in timber construction. Fixings should be galvanised clouts or staples for timber construction and tech screws for fastening to steel constructions. In high wind areas, it is recommended to install using non-rip caps on clouts, staples or tech screws. Horizontal, vertical and end overlaps must be 150 mm, with all top layers overlapping the outside of lower layers to prevent water ingress. Stagger any vertical overlaps.

Top of the content