Bunnings Warehouse
Bunnings Warehouse Lowest prices are just the beginning
Home›
 
 

How To Install a Polar Window

Banner   In this example we will show you the steps required to select and assemble a 1200mm high x 600mm wide RH openable Polar Window.

For our full range of polar windows, please visit your nearest Bunnings Warehouse.
 
How To Select And Assemble
step1   step2  

step3
1 Select a 600mm x 1200mm Openable Window in Black.   2 Select 2 x right hand (RH) Cam Handles. To install the handles use the provided 4 x stainless steel screws. Attach the handles as shown through the pre-drilled holes. he scuff plate has been factory fitted to prevent possible chipping and scratching.   3 Select 1 x 600mm Reveal Fin for thetop of the window and 2 x 1200mm Reveal Fins for the side of your window. Apply a bead of silicone in the centre guide of the Reveal Fins. To install simply slide each fin into the channel as shown.
         

step 4

   step 5    step 6
4 Select a Black 600mm Sub Sill Fin. Apply a bead of silicone in the centre guide of the Sub Sill Fin. To install, slide the Sub Sill Fin into the bottom channel of your window. The drainage holes must face outside.   5

To prepare your window for installation attach your Reveal Timber to each Reveal Fin by screwing through the pre-drilled holes.

Tip: Pre-drill holes into timber to avoid splitting.
6 Insert your window into the prepared opening in your home. Ensure the frame is packed plumb, square and not twisted within the openings. Check diagonals before fixing. Secure the window by nailing through Reveal lining into the stud frame.
         
 
Materials & Tools Required

 

   Use the following list as a guide to assist in the successful assembly and installation of your Polar Eco-View Windows.

 
  • Rubber mallet
  • Hammer
  • Cordless drill
  • Philips head screwdriver
  • Caulking gun/silicone
  • Pencil
  • Tape Measure 
  • Spirit level
  • Saw (if required to cut reveals to length)
  • Safety gear- dust mask, ear and eye protection.
 
Handy Hints

 

 
  • To assist in the assembly process ensure you assemble your window/s on a level or flat surface.
  • To avoid marking or scratching your windows the supplied cardboard box can be used to provide a non-marking flat surface.
  • Only ever use a rubber mallet when assisting the insertion of a joiner or reveal fin. Never use a metal hammer.
  • Once the cam handle is fitted ensure it is in the closed position to avoid the window from opening and to avoid damage whilst assembling.
  • The Polar static window film applied to all windows must face outwards once installed.
  • Double Glazed Windows are heavy. Use correct lifting techniques when moving cartons and windows into position.
  • For further assistance refer to the full Assembly and Installation Instructions supplied with your windows or via the Polar website.

 
 

Your Nearest Store

Mascot

Cnr Bourke Rd & Gardeners Rd,
Mascot, NSW 2020
(02) 9330 3800

Change your location:

 

Don't know the postcode?

Sign In or Register Now

Price Guarantee - If you happen to find a cheaper price on a stocked item. We'll beat it by 10%. * Excludes trade quotes, stock liquidations and commercial quantities. Shelf prices may be lower than advertised to ensure lowest prices everyday.

Wishlist

 
 

Looks like you are using a handheld device, you may prefer to visit the Bunnings Mobile site.